Having Scanbus Problems?  Scroll to bottom
Having Cdrecord Problems? Scroll to bottom

Selfboot Buddy Release3 by burnerO
==================================

Selfboot Buddy is a program to assist
in the burning process of the Dreamcast
emulators.  Since most of the steps for
burning Dreamcast Cd's are dos commands, I
thought a nice little front end could
be helpful.

Usage:
======

Unzip the files file from this
zip and run.  Sorry about the program
size, but it is self contained and
needs neither dlls, nor installation.
To uninstall the program, simply
delete the folder you extracted it to.

Apon first running sbbuddy, it will
warn you about some missing necessary
files.  A zip containing all of the
needed files can be found at
www.dcemulation.com or at
go.to/selfboot  Download the zip
called the self-boot toolkit.  Once
you have placed all of the files it
asks for in the same directory as
sbbuddy it will stop asking for the
files, and it will start up at the
1st step screen.

Once you get sbbuddy to a state
where it loads to the first step
screen initially, simply follow
the steps to burn the cd.

About:
======

This program was written with
Rapid-Q Basic, and source code is
included.  To get rqbasic goto:
http://www.basicguru.com/abc/rapidq/

The source is a mess, and
undocumented, but if you are
curios about quite basic windows
programming, it's enough to get
started.


If you have any questions or comments
I can be reached at eightbit@mail.ru

======================================================================

* Scanbus problems:

Here are some alternative methods to get the three scanbus numbers:

Blindread 3:
Chose next, then look at the top where it lists cd drives:
0:1:0 - cdrw; which translates to 0,1,0

Cdrwin:
Choose the top third button with the cd going to the
harddrive.  At the top where it says cd reader pull the
option down until you find your burner. It lists it as
0:1:0 cdrw; which translates to 0,1,0

Easy-Cd Pro 95:
In the bottom right corner it lists the scsi id of your
burner in cdrecord format, ex: 0,1,0

Nti Cd-Maker Pro:
Chose cd-rom record then select.  It lists your the scsi
id as (han:0,id:1,lun:0); which translates to 0,1,0

Winoncd 3.5:
chose options then preferences.  Under preferences chose
recorder from the top and it lists your scsi id as:
cdrw at Host 0, ID1, LUN 0; which translates to 0,1,0

======================================================================

* Cdrecord problems:

If you get an error while attempting to burn the second
session let me first say this: YOU HAVEN'T BURNED A COASTER!
Well, at least not yet...

If you have problems using cdrecord you'll be able to burn
the second session using cdrwin:
http://www.goldenhawk.com/cdrwin.htm

I don't know what causes this problem, but here's the cdrwin
tutorial:

1] Click the fourth button with the screwdriver.

2] Change the top "Backup/Tool Operation" to:
   Record an ISO9660 Image File

3] Click ... next to Image Filename and locate your data.iso.

4] Set Recording Options:

Disc Type: CDROM-XA
Track Mode: MODE2
Speed: 1X
Finalize/Close Session: Checked
Write Postgap: Checked
Open New Session: Unchecked
Verify Recorded Image: Unchecked
Test Mode: Unchecked
Enable BURN-Proof: Unchecked

5] Click START in the top right corner.

6] Try the disc in your Dreamcast when finished burning.

======================================================================