░ ░ ░
┌──────────────────────────── ▒▓ ────── ▒▓ ────────── ▒▓ ──────────────────┐
│X ░█▀▄▄ ░█▀▀ ▄█▀▀ ▓█▀ ▀▀▄ ▓█ ░▄▀█ ░▄ █ ▓█▀█ ░█▀▀ X│
│ ██ █ █ ██▀ ██ █ ██ ▓█▀█ ██ ██ ▄ ██ █ ██ █ ██▀ │
│ ░ ▒ ▓ █ ▓█ ▓ █ ▀█▓█ ██ ▓ ▀█▓▒ ▀██▓ ▀█▄ ▀█▓█ ▀█▓█ ██▓▀ ▀█▓█ █ ▓ ▒ ░ │
├──────────────────────────────────────────────────────────────────────────┤
│ │
│ │
│ - COBRA FOR VIPER GC V0.3 - │
│ │
│ 12th of january, 2005 │
│ │
│ │
│ Today is a big day for GC owners, as one of the best rated games (RE4) │
│ for the system was just released. To celebrate with you, we decided we │
│ would give you a new version of our Cobra BIOS. It allows PAL users │
│ to play their RE4 import, which was not possible with Cobra 0.2 ! │
│ │
│ What's the Cobra BIOS ? A special BIOS specially tailored for your │
│ Viper GC that allows yo to run your backups (and now homebrew code!) │
│ from the GC drive using DVD(-/+)R or Mini-DVD(+/-)R! │
│ │
│ So what do you need exactly ? │
│ - A Viper GC chip │
│ - This very flash file │
│ - Some Compatible Media and a DVD-burner │
│ │
│ │
│ WHAT'S NEW ? │
│ │
│ The software part was improved a lot while our low-level hackers had │
│ some great time in vacation :-) │
│ │
│ - NTSC Regionfix issue on PAL systems is fixed! │
│ - Wireless controller is now supported! │
│ - Added a real GUI │
│ - The following Cobra options can be changed (stored in Viper flash): │
│ - Default boot action │
│ - Boot action when the X-key is hold at boot time │
│ - Video mode of the Cobra GUI (doesn't change Games' video mode) │
│ - Behaviour of the lid sensor when booting Original BIOS │
│ - You can get detailed GC Version Info │
│ - You can explore the content of your GC discs (original and backups) │
│ and even DVDs with ISO9660 filesystem! │
│ - You can flash your Viper GC by burning the flash file on a DVD │
│ (but don't throw away your programmer in case of a bad flash! :-) │
│ - You can execute homebrew programs (.DOL) from DVD, and enjoy many │
│ already-released homebrew productions! │
│ │
│ │
│ USER MANUAL │
│ │
│ - Flash the Viper GC with this BIOS then remove the parallel port │
│ connector from the programmer. │
│ │
│ - Turn on your GC with an ORIGINAL DISC in the drive. │
│ If there's no Title Screen coming, but the original BIOS instead │
│ it's probably that you messed up your viper install:-) │
│ Check that it's clean (and no wires crossing each other etc...) │
│ If you have a black screen coming, it's probably because you have │
│ some wierd BIOS we don't support (and don't know about) yet. │
│ │
│ - While turning on your GC: │
│ - Hold Y to go to Main Menu (if it's not your Default Boot mode) │
│ - Hold X for the other boot mode (can be set in Config Menu) │
│ - Don't hold anything for Default Boot Action │
│ │
│ - Select "Boot DVD" if you want to play a backup / homebrew program │
│ from DVD. "Please wait..." should appear. then "SWAP DISC NOW" and │
│ the GC disc is stopped (and laser off). As soon as you see the disc │
│ is slowing down it's safe to remove the original disc and put your │
│ DVD-R instead. After a few seconds the drive will start to spin │
│ again and disc will boot (if you didn't have enough time to do the │
│ swap trick, turn off the GC and try again) │
│ │
│ - Remove the top of your GC if you want to use full-size DVD-R │
│ │
│ - Select "Original BIOS (Region Free)" if you want to play an original │
│ import Game. │
│ │
│ - Select "Original BIOS" if you want to play an original Game │
│ compatible with your GC region, or if you want to go into the │
│ Original BIOS menus. │
│ │
│ - Select "Configuration Menu" if you want to change your Cobra BIOS │
│ configuration. The options are quite self-explanatory. │
│ │
│ - Select "Disc Explorer" to enter what we belive is the best new │
│ feature in this BIOS! It allows you to browse the content or your │
│ original GC discs or DVDs (a swap trick is needed for them) ! │
│ Supported file systems are FST (GC File System) and ISO9660. │
│ Joliet encoding is not supported in ISO mode. │
│ │
│ - Enter "Disc Explorer" and select a .VGC file if you want to reflash │
│ your Viper GC without the need of the Parallel port programmer! │
│ │
│ - Enter "Disc Explorer" and select a .DOL file if you want to run │
│ a homebrew program! (You can put up to 1.4 GB of homebrew things on │
│ a disc. We hope this will give some inspiration to emu authors :-) │
│ Our DOL loader is not perfect for now and works for around half of │
│ the public homebrew programs. Here are some of the programs booting │
│ successfully: Kinderkram demo by Hitmen (you gotta see this), │
│ GC-Linux, Ascii Fighter, DVD Browser, CTR_GCS, CTR_SND, GBQ Gameboy │
│ emulator, PSOLoader "It's working" demo, Maze, Nitrorally, Yeti 3D │
│ 3D engine, Chip8 emulator, Snowlords game, Terranigma and probably │
│ many we missed! │
│ │
│ │
│ THE MEDIA │
│ │
│ The GC drive in its default state only eats high-quality DVD-R and │
│ a few MINI-DVD-R. But a couple of weeks ago, speedi from the afterdawn │
│ forums found a nice way to tweak the laser so it reads almost any burned│
│ media including some DVD+Rs. We recommend doing this laser tweak if you │
│ have any problems reading your DVDs. We are no laser experts, in fact │
│ we think it would be more appropriate to just lower the value of the │
│ variable resistor instead of setting it to an absoulte given value, │
│ but lots of people including us have been using this laser tweek for a │
│ couple of weeks without any problem reported so far. │
│ │
│ │
│ You don't need to encrypt the disc or use a special burner firmware │
│ to write the disc. Just burn your ISO/GCM (rename it to .ISO) with │
│ Nero (or any other tool). │
│ │
│ │
│ TROOBLESHOOTING │
│ │
│ Here are the current bugs we will fix in a future version: │
│ │
│ - Sometime the "SWAP DISC" message doesn't appear (or disc doesn't │
│ slow down/laser is still on). If this happen to you just turn off │
│ your GC and try again (ok, this is clearly our fault :-) │
│ │
│ - If sometimes after you swapped a disc there is a sync problem with │
│ the DVD-R and origial BIOS is not loading, then try again. If this │
│ happen very often, then you need a better media. │
│ │
│ - If the drive becomes idle for a couple of minutes, depending on the │
│ media you're using it might loose sync, and hang. This is also a │
│ bug of ours we will track. For now, if this happens to you, avoid │
│ "PAUSE MODE" in games. It almost never happens for people that don't │
│ have a ?8 Version. For more info about the issues with this version, │
│ keep on reading. │
│ │
│ - Audio Streaming: Some games use a special audio streaming mode │
│ that can be compared to CDDA. For now, the ISO of the file needs to │
│ be patched with 0rbital's great ViperTemporaryAudioFix 1.1+. If the │
│ ISO is not patched you'll have noise instead of music. We will try to │
│ fix this issue so no patching is required. But in case we do, YOUR │
│ PATCHED ISOS WILL BE FULLY COMPATIBLE and still work with music! │
│ (so forget what is written in the fixer nfo file). Don't run the fix │
│ on ISOs that don't need fixing as it will only destroy them :-) │
│ │
│ - Most multi-discs games are working, just play with Disc 1 until │
│ you're asked to change disc and make a save here. Then boot with │
│ Disc 2 instead. We started working on code to allow disc-change, │
│ and we'll integrate it in a new release. │
│ │
│ All those problems could be fixed in a next update. │
│ │
│ To know what's your GC Version code (2 digit number) go into Config │
│ Menu, then Version Info, 2nd page. First digit corresponds to GC │
│ mobo version, 2nd digit corresponds to drive version. │
│ │
│ There IS an issue with drive "8" and current BIOS. People with latest │
│ drive version can run backups, but get a lot of "Disc Errors". At first │
│ we thought it was some mechanical problem (different laser or so), but │
│ we got your hands on a 48 unit a couple of days ago (thanks Melan) and │
│ confirm it's 100% Cobra related! We already localized the problem and │
│ have a dirty-fix working! We'll work hard on making a clean fix and │
│ do the necessary testing (all "48" testing wasn't done by us directly), │
│ and you could expect a Cobra 0.4 version fully compatible with ?8 units │
│ within one week! It will then work fine on just every gc version. │
│ │
│ IF YOU MAKE BACKUPS, DON'T USE ANY "WIPE" TOOLS TO SAVE SPACE. Unless │
│ you know it's REALLY working. Most of thoses tools only work because │
│ the current pso loaders patch libraries routines to emulate DVD. But │
│ on REAL HARDWARE, each file/fst has to be aligned on a 4-byte boundary! │
│ Else nothing will work. Audio Files (for audio streaming) even need │
│ to be aligned on a 32kb-boundary ! So forget current "WIPE" tools until │
│ they are fixed. But note that Garbage is NOT NEEDED by the GC. The │
│ files must be correctly aligned that's it. So if your "WIPE" tool is │
│ not changing the image size (meaning there's no relocation) then it's │
│ probably fine. It is also possible to write a tool that re-aligns the │
│ files of a badly-wiped image. │
│ │
│ │
│ THE RUMORS │
│ │
│ We won't comment on the tons of rumors we read daily about the Cobra, │
│ we can just say that what you don't read here is not official. But we │
│ feel honored so many people decided to look at our code, too bad we │
│ didn't expect your visit or we'd have added some funny hidden messages! │
│ Depends on what your goal was, we made it even easier for you this │
│ time. Just hold Z at boot time :-) │
│ │
│ │
│ THE FUTURE │
│ │
│ We now have a 48 unit for a couple of days, and already found a fix for │
│ it so cleaning/testing/releasing it is now our main priority. │
│ Apart from that, we have written a complete Cheat System compatible │
│ with (decrypted) AR codes. Only the GUI for it has to be written now. │
│ (Maybe we can even support crypted codes if Parasyte allows us to │
│ integrate his great GCNcrypt tool into the Cobra? :-) │
│ We have lots of ideas to expand the Disc Explorer possibilities as │
│ well! │
│ │
│ │
│ CLOSING WORDS │
│ │
│ Special thanks to E*Flash for his help, RoM for the early units, │
│ Melan for the /48 GC and to everybody that tried Cobra V0.2 and posted │
│ constructive feedback. │
│ │
│ You are free to redistribute this package as long as it's not changed, │
│ patched, ported, or whatever. │
│ │
│ Our code is free of any copyrighted code from third party. │
│ It is also free of any GPL licensed code, we have strong respect for │
│ other people's hard work. We only ask you to show similar respect │
│ toward our work. To put it in other words, if you are in the "right" │
│ side, draw the line between learning and stealing. Thank you. │
│ │
│ That's it for this NFO, hope we didn't miss some important point. │
│ │
│ Have a nice day :-) │
│ │
│ ░ ░ ░ │
├──────────────────────────── ▒▓ ────── ▒▓ ────────── ▒▓ ──────────────────┤
│ ░█▀▄▄ ░█▀▀ ▄█▀▀ ▓█▀ ▀▀▄ ▓█ ░▄▀█ ░▄ █ ▓█▀█ ░█▀▀ │
│ ██ █ █ ██▀ ██ █ ██ ▓█▀█ ██ ██ ▄ ██ █ ██ █ ██▀ │
│X ░ ▒ ▓ █ ▓█ ▓ █ ▀█▓█ ██ ▓ ▀█▓▒ ▀██▓ ▀█▄ ▀█▓█ ▀█▓█ ██▓▀ ▀█▓█ █ ▓ ▒ ░ X│
└──────────────────────────────────────────────────────────────────────────┘