I thought this little idea was so obvious that someone else would have tried
it by now (maybe even Datel), but no one else seemed bothered, so here it is!
I originally tried this with the idea of totally removing the protection from
one of the old rom PAL machines, but after an in depth examination of the code
I came to the conclusion that it's probably impossible to make it boot a copy
or import game without a hardware modification. The problem is that the boot
rom does not actually check for the country codes or CD protection at all!
Whenever the CD controller chip (big surface mount chip on the bottom of the
board) is reset (by switching on/resetting/pressing the door closed sensor) it
will check the CD protection and country codes by itself. In this respect it
is basically a co-processor with it's own instruction set, ram, i/o etc., and
therefore it is probably impossible to hack this chip by using "something"
attached to the cartridge port. If the CD controller fails to find the CD
protection and correct country codes it will not allow any further data read
commands to complete successfully. I even tried forcing the boot rom through
the CD read commands, but it still just refused to load anything and just
hung in the CD read code. Unless there are some weird (probably undocumented)
commands that can be sent to the CD controller to force it back into data mode
(I doubt even SONY would be _that_ stupid!) it's basically impossible to make
it boot a copy or import game without cracking the CD controller itself.
The actual CD protection is located somewhere in the lead in section of the
CD, either in the unused sub-codes (R thru W) or in the usually zeroed data
section of the sectors. This is definitely copyable, but it'll require
modified firmware in a CD recorder to allow reading/writing to the lead in
and I really don't fancy wasting CD's while testing the hacked firmware!!
The NEW rom machines are a little different. They still have exactly the same
method of checking the CD protection and country codes with the CD controller,
but in addition to that they also have TWO EXTRA checks during the boot
sequence in an attempt to make sure you're not swapping discs or using the
audio menu method to play imports/copies. These extra checks are implemented
by allowing the CD controller to be reset by code in the boot rom, which
means that the protection/country codes can basically be checked at any time
under software control. As with the old rom machines, the first check is still
required to get the CD controller into "data" mode, but after that the second
and third checks can be bypassed, and that is exactly what this hack does,
allowing you to boot with only 1 swap (at the usual place, as soon as you hear
the sound on the intro), or with the famous audio menu method.
All you need is an Action Replay cartridge and the PC interface/comms software.
Backup or Rename your existing AR.ROM file, copy the AR.ROM file from this
archive to your action replay comms directory and then type UPGRADE to
download the new rom image to the cart. Once you've downloaded the new image
the cart. will no longer function as an Action Replay, but you can restore
it by downloading your old AR.ROM file back onto the cart. if you want to.
This version will only work on NEW rom PAL machines, (if you attach the cart.
to an OLD rom PAL machine it will be ignored!). If someone can send me a dump
of the old and new roms from a Japanese and US playstation then I can convert
this version to work on NEW rom JAP and US machines, but at the moment I've
got no idea what will happen if you try this on a JAP or US playstation!
That's it for now, hope you find this of some use...
Thanks to the guys at Datel for making the AR cart., I'm sure you'll have fun
with this version... at least it'll sell a few more carts for you!!
CyNiX / TMB - 21/04/96